Making Socket Connection - Agilent Technologies N1913a User Manual

Making Socket Connection

The power meter can be remotely connected via socket connection. To
connect the meter using socket connection,
1 Right- click the Agilent IO Libraries
2 On the Agilent Connection Expert window, click on
Figure 1-11 Add Instrument window
3 On the Add LAN Instruments window (see
4 Select the Use IP Address option and type the IP address. Select the Use
5 Click Test Connection to test if the instrument is present.
6 Click OK. You will then return to the Agilent Connection Expert window
Agilent N1913/1914A EPM Series Power Meters User's Guide
Agilent Connection Expert.
Add Instrument window will be prompted out. Select Add LAN instrument
on LAN (TCPIPO) interface and click OK (see
Address.
socket connection.
(see Figure 1- 13). Your meter is successfully connected via socket
connection.
Introduction
icon on the taskbar and select
Figure 1- 11).
12), click the Add
Figure 1-
1
. An
27