Figure 7-3 Frequency Pop-Up - Agilent Technologies N1913a User Manual

Now, set the frequency of the signal you want to measure. The power
meter automatically selects the appropriate calibration factor.
4 Press
5 Use the

Figure 7-3 Frequency pop-up

6 Confirm your choice by pressing
7 Press
8 Proceed to make the measurement.
9 Reconnect any required attenuators or adaptors and connect the power
The corrected measurement result is displayed.
N1913A/1914A EPM Series Power Meters User's Guide User's Guide
. On dual channel meters select the required channel.
and
to display the Frequency pop- up. Use the numeric
and press
keypad to enter the required value in the Frequency pop- up window.
key to close the Channel Setup screen.
sensor to the signal to be measured.
Using U2000 Series USB Power Sensors
keys to highlight the Frequency value field
MHz
or
GHz
.
7
173