Saving And Recalling Power Meter Configurations - Agilent Technologies E4419B User Manual

2 Power Meter Operation

Saving and Recalling Power Meter Configurations

To reduce repeated setup sequences, up to ten power meter configurations can
be stored in the power meter's nonvolatile memory. The GPIB address, the
data stored in the sensor calibration tables and the zeroing and calibration
data are not stored by a preset. The calibration table selected is not affected.
Power meter configurations are saved and recalled with the
To save the current measurement setup:
1 Press
2 Use the
3 Press
If you require to modify the name of a file:
1 Press
2 Use the
3 To confirm your choice, press
To recall a measurement setup:
1 Press
2 Use the
3 Press
94
.
and
required file is highlighted, press
.
Confirm
.
and
required file is highlighted, press
file name in a pop-up window. Modify this name (see below) until the
desired name is displayed.
• Use or to modify the character on which the cursor is currently
positioned.
• Use or to move to other characters.
• Use
Insert Char
.
and
required file is highlighted, press
.
Confirm
keys to scroll through the displayed files. When the
.
Save
keys to scroll through the displayed files. When the
Edit Name
and as required.
Delete Char
.
Enter
keys to scroll through the displayed files. When the
Recall
. The power meter displays the
.
E4419B Power Meter User's Guide
key.