Step Detection - Agilent Technologies N1913a User Manual

Step Detection

To reduce the filter settling time after a significant step in the measured
power the filter can be set to re- initialize upon detection of a step
increase or decrease in the measured power. Step detection can be set in
both manual and automatic measurement average modes.
Procedure
Set step detection as follows:
1 Press
2 Use the
3 Press
4 Press
N1913/1914A EPM Series Power Meters User's Guide
. On dual channel meters select the required channel.
keys to select the Step Detect setting field.
and
to check the step detection to on or off.
key to close the Channel Setup screen.
General Power Meter Functions 2
51