Agilent Technologies N1913a User Manual page 234

9 Maintenance
• from the front panel by pressing
• from the serial number label.
The serial number label is attached to the rear of each Agilent
Technologies instrument. This label has two instrument identification
entries. The first provides the instruments serial number and the second
provides the identification number for each option built into the
instrument.
The serial number is divided into two parts: the prefix (two letters and
the first four numbers), and the suffix (the last four numbers).
• The prefix letters indicate the country of manufacture. This code is
• The suffix indicates an alpha numeric code which is used to ensure
Recommended Calibration Interval
Agilent Technologies recommends a two- years calibration cycle for the
N1913/1914A EPM Series power meter.
210
based on the ISO international country code standard, and is used to
designate the specific country of manufacture for the individual
product. The same product number could be manufactured in two
different countries. In this case the individual product serial numbers
would reflect different country of manufacture codes. The prefix also
consists of four numbers. This is a code identifying the date of the last
major design change.
unique identification of each product throughout Agilent Technologies.
SERIAL NUMBER
SER MY12345678
OPT
Agilent
MADE IN MALAYSIA
Agilent N1913A/1914A EPM Series Power Meters User's Guide
1 of 2 Service Version
, , , .