Agilent Technologies N1913a User Manual page 71

If you measure a signal with a frequency outside the frequency range defined in the
N O T E
frequency dependent offset table, the power meter uses the highest or lowest frequency
point in the frequency dependent offset table to calculate the offset
Selectable Frequency Dependent Offset Unit (dB or %)
The offset in dB range is from –100 dB to +100 dB.
The equivalent range in % is from 0.0000000001% to 10000000000%.
Once the offset unit is selected, it will be applied to all the offsets in the
selected table and also to the remaining nine tables.
To change the offset unit to dB, press
To change the offset unit to %, press
N1913/1914A EPM Series Power Meters User's Guide
General Power Meter Functions
1 of 2 Offset Unit
, , and
1 of 2 Offset Unit
, , and
2
dB
.
%
.
47