5
Using 8480 Series Power Sensors
10 To change the settings, use the
Figure 5-4 Calibration factor pop-up window
11 Press
12 Connect the power sensor to the signal to be measured.
13 The corrected measurement result is displayed.
Figure 5-5 Calibration factor display
134
Fac value field and press
numeric keypad to enter the required value in the Cal Factor pop- up
window.
%
to complete the entry.
and
to display the Cal Factor pop- up. Use the
N1913/1914A EPM Series Power Meters User's Guide
keys to highlight the Cal
Calibration Factor