Figure 2-21 Trigger Setting Menu 1 Of 2; Figure 2-22 Trigger Setting Menu 2 Of 2 - Agilent Technologies N1913a User Manual

Figure 2-21 Trigger setting menu 1 of 2

Figure 2-22 Trigger setting menu 2 of 2

8 Press
9 Press
10 Press
11 Set the trigger buffer size by sending SENSE:BUFFer:COUNt
N1913/1914A EPM Series Power Meters User's Guide
Source Ext
and
1 of 2 Output
,
at the rear panel TRIG OUT BNC port when the meter is triggered upon a
completed measurement.
Slope
and select
<buffer_size> command to meter using remote interface.
will be automatically enabled.
On
and to allow a TTL level high to be produced
+ –
or to set the trigger edge.
General Power Meter Functions
External trigger source
2
57