Saving And Recalling Power Meter Configurations - Agilent Technologies E4419B User Manual

Saving and Recalling Power Meter Configurations

To reduce repeated setup sequences, up to ten power meter configurations
can be stored in the power meter's non-volatile memory. The GP-IB
address, the data stored in the sensor calibration tables and the zeroing
and calibration data are not stored by a preset. The calibration table
selected is not affected.
Power meter configurations are saved and recalled with the
hardkey.
To save the current measurement setup:
Save
1. Press .
Recall
2. Use the
files. When the required file is highlighted press
3. Press
Confirm
If you require to modify the name of a file:
Save
1. Press .
Recall
2. Use the
files. When the required file is highlighted press
power meter displays the file name in a pop up window. Modify
this name (see below) until the desired name is displayed.
Use
is currently positioned.
Use
Use
Insert Char
3. To confirm your choice press
To recall a measurement setup:
Save
1. Press .
Recall
2. Use the
files. When the required file is highlighted press
3. Press Confirm
Agilent E4419B User's Guide
Saving and Recalling Power Meter Configurations
and hardkeys to scroll through the displayed
.
and hardkeys to scroll through the displayed
or to modify the character on which the cursor
or to move to other characters.
and
Delete Char
Enter
and hardkeys to scroll through the displayed
.
Power Meter Operation
Save
Recall
.
Save
Edit Name
as required.
.
Recall
. The
.
2-67