Now, set the frequency of the signal you want to measure. The power
meter automatically selects the appropriate calibration factor.
4 Press
5 Use the
Figure 6-4 Frequency pop-up
6 Confirm your choice by pressing
7 Press
8 Connect the power sensor to the signal to be measured. The corrected
N1913/1914A EPM Series Power Meters User's Guide
. On dual channel meters, select the required channel.
and
to display the Frequency pop- up. Use the numeric keypad
press
to enter the required value in the Frequency pop- up window.
key to close the Channel Setup screen. Proceed to make
the measurement.
measurement result is displayed.
Using N8480 Series Power Sensors
keys to highlight the Frequency value field and
MHz
or
GHz
.
6
153