Agilent Technologies N1913a User Manual page 125

• This battery pack uses Lithium-ion (Li-ion) batteries.
WA R N I N G
• Do not short circuit the battery terminals.
• Do not subject the battery to excessive heat.
• Do not dispose of by burning.
• Lithium-ion (Li-ion) cells are considerably more environmentally friendly than
• Refer to your local country regulatory requirements on the disposal of Lithium-ion
Running Time
Typical running times and conditions as follows:
Power Meter Sensor LCD Backlight
Model
N1913A Up to 6 hours
N1914A
Use the battery only for its intended purpose. Only use the Agilent battery option power
C A U T I O N
meter models to charge the battery.
The battery packs should be stored in an environment with low humidity and free from
corrosive gas at a recommended temperature range <21 °C. Extended exposure to
temperatures above 45 °C could degrade the battery's performance and life.
N1913/1914A EPM Series Power Meters User's Guide
Nickel-Cadmium (NiCD) cells but you should follow battery safety guidelines.
(Li-ion) batteries
Sensor LCD Backlight
ON
Up to 7 hours 20 minutes Up to 6 hours 15 minutes Up to 7 hours 30 minutes
No Sensor LCD
OFF Backlight ON
General Power Meter Functions
No Sensor LCD
Backlight OFF
2
101