Table 2-3 Range Of Values For Window Limits - Agilent Technologies N1913a User Manual

Setting Limits
The power meter can be configured to verify the current measurement in
any measurement line against predefined upper and/or lower limit values.
The range of values that can be set for the upper and lower limits and the
default values depends on the measurement units in the currently selected
measurement line (see

Table 2-3 Range of values for window limits

Procedure
Set the limits as follows:
Ensure you have selected the channel you wish to set up.
N O T E
1 Press
2 Use the
3 Press
4 Use the
5 Press
N1913/1914A EPM Series Power Meters User's Guide
Window Maximum
Units
dB +200 dB
dBm +230 dBm
% 999.9 X%
W 100.000 XW
Meas Select
,
and
to check the Limits: setting field.
key to highlight the Minimum Limits: value field.
to display the Minimum Limit pop- up.
Table 2- 3).
Minimum
–180 dB
–150 dBm
100.0 a%
1.000 aW
to display the Measurement Setup menus.
keys to highlight the Limits: setting field.
General Power Meter Functions
Default Default
Maximum Minimum
60 dB –120 dB
90 dBm –90 dBm
100.0 M% 100.0 p%
1.000 MW 1.000 pW
2
63