2
General Power Meter Functions
Setting the Cable Short/Long
When connecting the power sensor with Agilent 11730F power sensor
cable, 61 m (200 ft), you are required to change the cable setting from
Short (default setting) to Long, or an error will occur when the power
sensor is connected.
To access the cable setting,
1 Press
2 In the Service menu, press
The LCB indicator will appear in blue at the bottom of the display to
indicate that the long cable option is selected as shown in
Figure 2-67 Short/long cable option
102
1 of 2
,
between the short or long cable option.
Service
and select
.
1 of 2
and select
N1913/1914A EPM Series Power Meters User's Guide
Cable Short/Long
to toggle
Figure 2-
67.