Single Function Measurement; Figure 2-28 Function Pop-Up - Agilent Technologies N1913a User Manual

Single Function Measurement

Figure 2- 27
measurement line of the upper window. (For single channel power meter,
N1913A, the Channel field will be disabled, as shown in
The gate field is disabled if trigger acquisition is Free Run.
N O T E
1 Use the
2 Press

Figure 2-28 Function pop-up

3 Press
4 The Meas field is set to Avg by default.
5 Press
N1913/1914A EPM Series Power Meters User's Guide
shows an average measurement assigned in the upper
, ,
to display the Function pop- up, and use the
to highlight Single.
to complete the entry.
key to complete the setup and display the measurement
results.
General Power Meter Functions
, , to highlight the Combination function field.
2
Figure 2- 27).
and
67