Saving And Recalling Power Meter Configurations - Agilent Technologies E4418B User Manual

2 Power Meter Operation

Saving and Recalling Power Meter Configurations

To reduce repeated setup sequences, up to ten power meter configurations
can be stored in the power meter's nonvolatile memory. The GPIB address
and command set, the data stored in the sensor calibration tables and the
zeroing and calibration data are not stored by a preset. The calibration
table selected is not affected.
Power meter configurations are saved and recalled with the
To save the current measurement setup:
1 Press
2 Use the
3 Press
If you require to modify the name of a file:
1 Press
2 Use the
3 To confirm your choice, press
To recall a measurement setup:
1 Press
2 Use the
3 Press
88
.
and
the required file is highlighted, press
.
Confirm
.
and
the required file is highlighted, press
displays the file name in a pop- up window. Modify this name (see
below) until the desired name is displayed.
• Use or
currently positioned.
• Use or
• Use
Insert Char
.
and
the required file is highlighted, press
.
Confirm
keys to scroll through the displayed files. When
Save
keys to scroll through the displayed files. When
Edit Name
to modify the character on which the cursor is
to move to other characters.
and as required.
Delete Char
.
Enter
keys to scroll through the displayed files. When
Recall
.
. The power meter
.
E4418B Power Meter User's Guide
key.