Figure 5-9 "Sensor Tbls" Screen - Agilent Technologies N1913a User Manual

5 Using 8480 Series Power Sensors
Editing frequency dependent offset tables requires the following steps:
1 Identify and select the table you want to edit.
2 Rename the table.
3 Enter the frequency and offset pairs.
4 Save the table.
Procedure
First select the table you want to edit as follows:
1 Press

Figure 5-9 "Sensor Tbls" screen

2 Choose the table you want to edit using the
140
Tables
,
screen.
Edit Table
to display the Edit Cal screen as shown in
Sensor Cal Tables
,
N1913/1914A EPM Series Power Meters User's Guide
to display the Sensor Tbls
and keys. Press
Figure 5- 10.