Warm Start
The warm start feature allows you to retain the meter's same states and
settings upon power cycle or in the event of interrupted power. The warm
start ON/OFF is selectable through the front panel and SCPI. The default
setting is ON.
Warm start ON
All the states entered through the front panel or remote interface will be
saved. The power meter will be powered on with the states before it was
powered off.
Warm start OFF
The power meter will be powered on with the default states setting.
To enable or disable the warm start feature,
1 Press
2 In the Service menu, press
Figure 2-60 Enable/disable warm start feature
N1913/1914A EPM Series Power Meters User's Guide
1 of 2
,
warm start feature. This feature is set to ON by default (see
Figure 2-
60).
Service
and select
.
Warm Start Off/On
General Power Meter Functions
to enable or disable the
2
95