Figure 6-8 Sensor Table Selected - Agilent Technologies N1913a User Manual

6 Using N8480 Series Power Sensors
Selecting a Sensor Calibration Table
You can select a calibration factor table from the
followed by
The State column indicates if any calibration factor tables are currently
selected. The Sensor Tbls screen is shown in
You can also view which sensor table is being used by pressing the
N O T E
use the
Procedure
Select sensor calibration table as follows:
1 Press
2 Use the

Figure 6-8 Sensor table selected

160
Tables
and
and
to display the table.
Tables
,
and
Table
press to highlight
Sensor Cal Table
.
keys to highlight the CF Table setting field and press
Sensor Cal Tables
,
keys to highlight one of the 20 table titles and
On
.
N1913/1914A EPM Series Power Meters User's Guide
key menu
Figure 6- 8.
.
,
Offset and