Cisco ONS 15454 Troubleshooting Manual page 455
Hide thumbs
Also See for ONS 15454:
- Procedure manual (850 pages) ,
- Reference manual (728 pages) ,
- Software feature and configuration manual (232 pages)
Table of Contents
Advertisement
Chapter 2
Alarm Troubleshooting
Identify a BLSR Ring Name or Node ID Number
Log into a node on the network.
Step 1
In node view, choose Go to Network View from the View menu.
Step 2
Click the Provisioning > BLSR tabs.
Step 3
From the Ring Name column, record the ring name, or in the Nodes column, record the Node IDs in the
Step 4
BLSR. The Node IDs are the numbers in parentheses next to the node name.
Change a BLSR Ring Name
Log into a node on the network.
Step 1
In node view, choose Go to Network View from the View menu.
Step 2
Click the Provisioning > BLSR tabs.
Step 3
Highlight the ring and click Edit.
Step 4
In the BLSR window, enter the new name in the Ring Name field.
Step 5
Step 6
Click Apply.
Step 7
Click Yes in the Changing Ring Name dialog box.
Change a BLSR Node ID Number
Log into a node on the network.
Step 1
In node view, choose Go to Network View from the View menu.
Step 2
Click the Provisioning > BLSR tabs.
Step 3
Highlight the ring and click Edit.
Step 4
In the BLSR window, right-click the node on the ring map.
Step 5
Step 6
Select Set Node ID from the shortcut menu.
Step 7
In the Edit Node ID dialog box, enter the new ID. The Node ID is the number in parentheses after the
Node Name.
Click OK.
Step 8
Verify Node Visibility for Other Nodes
Step 1
Log into a node on the network.
Step 2
In node view, click the Provisioning > BLSR tabs.
Step 3
Highlight a BLSR.
November 2009
2.9.1 Node and Ring Identification, Change, Visibility, and Termination
Cisco ONS 15454 Troubleshooting Guide, R8.5
2-261
Advertisement
Table of Contents
