Cisco ONS 15454 Troubleshooting Manual page 242

2.7.25 AS-MT-OOG
Clear the AS-MT Condition
Complete the
Step 1
If the condition does not clear, log into the Technical Support Website at
Step 2
http://www.cisco.com/techsupport for more information or call Cisco TAC 1 800 553-2447.
2.7.25 AS-MT-OOG
The Alarms Suppressed on an Out-Of-Group VCAT Member condition is raised on an STS or VT
member of a VCAT group whenever the member is in the IDLE (AS-MT-OOG) admin state. This
condition can be raised when a member is initially added to a group. In the IDLE (AS-MT-OOG) state,
all other alarms for the STS or VT are suppressed.
The AS-MT-OOG condition clears when an STS or VT member transitions to a different state from IDLE
(AS-MT-OOG) or when the member is removed completely from the VCAT group. The condition does
not require troubleshooting unless it does not clear.
If the condition does not clear, log into the Technical Support Website at
http://www.cisco.com/techsupport for more information or call Cisco TAC 1 800 553-2447.
2.7.26 AUD-LOG-LOSS
The Audit Trail Log Loss condition occurs when the log is 100 percent full and the oldest entries are
being replaced while new entries are generated. The log capacity is 640 entries. The log must be
off-loaded using the following procedure to make room for more entries.
Clear the AUD-LOG-LOSS Condition
In node view, click the Maintenance > Audit tabs.
Step 1
Step 2 Click Retrieve.
Step 3 Click Archive.
Step 4 In the Archive Audit Trail dialog box, navigate to the directory (local or network) where you want to
save the file.
Step 5 Enter a name in the File Name field.
You do not have to assign an extension to the file. It is readable in any application that supports text files,
such as WordPad, Microsoft Word (imported), etc.
Click Save.
Step 6
The 640 entries are saved in this file. New entries continue with the next number in the sequence, rather
than starting over.
Cisco ONS 15454 Troubleshooting Guide, R8.5
2-48
"Clear an OC-N Card Facility or Terminal Loopback Circuit" procedure on page
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SONET Logical Objects: STSTRM, VT-TERM
Default Severity: Not Alarmed (NA), Non-Service-Affecting (NSA)
SONET Logical Object: NE
Chapter 2 Alarm Troubleshooting
2-276.
November 2009