Chapter 5 Protocol-Based Vlan Commands; Protocol-Vlan Template - TP-Link T2600G-28TS Reference Manual

Chapter 5
Protocol VLAN (Virtual Local Area Network) is the way to classify VLANs based on Protocols. A
Protocol is relative to a single VLAN ID. The untagged packets and the priority-tagged packets
matching the protocol template will be tagged with this VLAN ID.

protocol-vlan template

5.1
Description
The protocol-vlan template command is used to create Protocol-based VLAN
template. To delete Protocol-based VLAN template, please use no
protocol-vlan template command.
Syntax
protocol-vlan template name protocol-name frame { ether_2 ether-type type
| snap ether-type type | llc dsap dsap_type ssap ssap_type }
no protocol-vlan template template-idx
Parameter
protocol-name —— Give a name for the Protocol-based VLAN Template ,
which contains 8 characters at most.
ether_2 ether-type type —— Specify the Ethernet type.
snap ether-type type —— Specify the Ethernet type.
llc dsap dsap_type ssap ssap_type —— Specify the DSAP type and the SSAP
type.
template-idx —— The number of the Protocol-based VLAN Template. You can
get the template corresponding to the number by the
template
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Protocol-based VLAN Commands
command.
38
show protocol-vlan