Snmp-Server Traps Vlan - TP-Link T2600G-28TS Reference Manual

spanning-tree —— Enable spanning-tree trap. It is sent when the port
forwarding status changes or the port receives TCN packet or packet with TC
fport-channel-.
memory —— Enable memory trap. It is sent when memory usage exceeds 80%.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Enable SNMP extended bandwidth-control trap for the switch:
T2600G-28TS(config)# snmp-server traps bandwidth-control

snmp-server traps vlan

39.11
Description
The snmp-server traps vlan command is used to enable SNMP extended
VLAN-related traps which include two types: create and delete. To disable this
function, please use no snmp-server traps vlan command.
Syntax
snmp-server traps vlan [ create | delete ]
no snmp-server traps vlan [create | delete ]
Parameter
create —— Enable VLAN-created trap. It is sent when new VLAN is created
successfully.
delete —— Enable VLAN-deleted traps. It is sent when VLAN is deleted
successfully.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Enable all SNMP extended VLAN-related traps for the switch：
T2600G-28TS(config)# snmp-server traps vlan
Enable VLAN-created trap only for the switch:
350