Parameter
profile-id —— Specify the profile ID, ranging from 1 to 999.
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet / interface port-channel / interface range port-channel)
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Bind profile 1 to interface gigabitEthernet 1/0/2:
T2600G-28TS(config)# interface gigabitEthernet 1/0/2
T2600G-28TS(config-if)# ip igmp filter 1
clear ip igmp snooping statistics
37.25
Description
The clear ip igmp snooping statistics command is used to clear the statistics
of the IGMP packets.
Syntax
clear ip igmp snooping statistics
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Clear the statistics of the IGMP packets:
T2600G-28TS(config)# clear ip igmp snooping statistics
show ip igmp snooping
37.26
Description
The show ip igmp snooping command is used to display the global
configuration of IGMP snooping.
Syntax
show ip igmp snooping
314