Now, you can logon by Telnet in login mode:
1. Make sure the switch and the PC are in the same LAN. Click Start and type in cmd in the
Search programs and files window and press the Enter button.
2. Type telnet 192.168.0.1 in the command prompt shown as Figure 1-10, and press the Enter
button.
3. You are prompted to enter the connection password 456 you have set through Console port
connection, and then you are in User EXEC Mode.
Figure 1-9 Run Window
Figure 1-10 Connecting to the Switch
Figure 1-11 Enter into the User EXEC Mode
10