osd —— Out of Band disposal of Stream Condition. It is the disposal way of the
data packets those are transmitted beyond the rate. There are two options,
"none" and "discard". By default, the option is "none".
Command Mode
Action Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Edit the actions for policy1. For the data packets matching ACL 120 in the policy,
if the rate beyond 1000kbps, they will be discarded by the switch:
T2600G-28TS(config)#access-list policy action policy1 120
T2600G-28TS(config-action)#s-condition rate 1000 osd discard
s-mirror
33.17
Description
The s-mirror command is used to configure Stream Mirror function of policy
action to the specified port.
Syntax
s-mirror interface { gigabitEthernet port }
Parameter
port —— The Mirror Port number of Stream Mirror.
Command Mode
Action Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Edit the actions for policy1. Specify the mirror port as Gigabit Ethernet port 1/0/2
for the data packets matching ACL 120:
T2600G-28TS(config)#access-list policy action policy1 120
T2600G-28TS(config-action)#s-mirror interface gigabitEthernet 1/0/2
255