Dldp Reset(Global); Dldp(Interface) - TP-Link T2600G-28TS Reference Manual

dldp reset(global)

36.4
Description
The dldp reset command is used to reset all the unidirectional links and restart
the link detect process.
Syntax
dldp reset
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin and Operator level users have access to these commands.
Example
Reset the DLDP function globally:
T2600G-28TS(config)# dldp reset

dldp(interface)

36.5
Description
The dldp command is used to enable the DLDP function of the specified port. To
disable it, please use no dldp command.
Syntax
dldp
no dldp
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
Privilege Requirement
Only Admin and Operator level users have access to these commands.
Example
Enable the DLDP function of ports 1/0/2-4:
T2600G-28TS (config)# interface range gigabitEthernet 1/0/2-4
T2600G-28TS (config-if-range)# dldp
294