Ipv6 Mld Snooping Vlan-Config - TP-Link T2600G-28TS Reference Manual

ipv6 mld snooping vlan-config

38.10
Description
The ipv6 mld snooping vlan-config command is used to enable VLAN MLD
Snooping function or to modify MLD Snooping parameters, and to create static
multicast IP entry. To disable the VLAN MLD Snooping function, please use no
ipv6 mld snooping vlan-config command.
Syntax
ipv6 mld snooping vlan-config vlan-id-list [ rtime router-time | mtime
member-time | rport interface { gigabitEthernet port-list | port-channel
port-channel-id } ]
ipv6
{ gigabitEthernet port-list | port-channel port-channel-id }
no ipv6 mld snooping vlan-config vlan-id-list [ rtime router-time | mtime
member-time | rport interface { gigabitEthernet port-list | port-channel
port-channel-id } ]
no ipv6 mld snooping vlan-config vlan-id-list static ip interface
{ gigabitEthernet port-list | port-channel port-channel-id }
Parameter
vlan-id-list —— The ID list of the VLAN desired to modify configuration, ranging
from 1 to 4094, in the format of 1-3, 5.
router-time —— Router Port Time. Within this time, if the switch does not
receive IGMP query message from the router port, it will consider this port is not
a router port any more. Router Port Time ranges from 60 to 600 in seconds. By
default, it is 0 and the global router-time will be used.
member-time —— Member Port Time. Within this time, if the switch does not
receive IGMP report message from the member port, it will consider this port is
not a member port any more. Member Port Time ranges from 60 to 600 in
seconds. By default, it is 0 and the global member-time will be used.
port-list —— The list of Ethernet ports.
port-channel-id —— The ID of the port channels.
ip —— The static multicast IP address.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin and Operator level users have access to these commands.
mld snooping vlan-config
325
vlan-id-list static ip interface