Snmp-Server Community - TP-Link T2600G-28TS Reference Manual

emode —— The Privacy Mode of the SNMP v3 User, with none and DES
options. None indicates no privacy method is used, and DES indicates DES
encryption method is used. By default, the Privacy Mode is "none".
encrypt-pwd —— Privacy Password, ranging from 1 to 16 characters. The
question marks and spaces are not allowed. This password in the configuration
file will be displayed in the symmetric encrypted form.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Add Local User admin to Group group2, and configure the Security Model of the
user as v3, the Security Level of the group as authPriv, the Authentication Mode
of the user as MD5, the Authentication Password as 11111, the Privacy Mode as
DES, and the Privacy Password as 22222:
T2600G-28TS(config)# snmp-server user admin local group2 smode v3 slev
authPriv cmode MD5 cpwd 11111 emode DES epwd 22222

snmp-server community

39.5
Description
The snmp-server community command is used to add Community. To delete
the corresponding Community, please use no snmp-server community
command. SNMP v1 and SNMP v2c adopt community name authentication.
The community name can limit access to the SNMP agent from SNMP network
management station, functioning as a password.
Syntax
snmp-server community name { read-only | read-write } mib-view
no snmp-server community name
Parameter
name —— Community Name, ranging from 1 to 16 characters.
read-only | read-write —— The access rights of the community, with read-only
and read-write options.
mib-view —— The MIB View for the community to access.
344