Chapter 4 Protocol Vlan Commands; Protocol-Vlan Template; Protocol-Vlan Vlan - TP-Link JetStream TL-SL3428 Cli Reference Manual

Chapter 4
Protocol VLAN (Virtual Local Area Network) is the way to classify VLANs based on Protocols. A
Protocol is relative to a single VLAN ID. The untagged packets and the priority-tagged packets
matching the protocol template will be tagged with this VLAN ID.

protocol-vlan template

Description
The protocol-vlan template command is used to create or delete Protocol
VLAN template.
Syntax
protocol-vlan template add {protocol-name} {ether-type}
protocol-vlan template remove index
Parameter
protocol-name —— Give a name for the Protocol Template , which contains
8 characters at most.
ether-type ——Enter the Ethernet protocol type field in the protocol template,
composing 4 Hex integers.
index —— The number of the Protocol template. You can get the template
corresponding to the number by the show protocol-vlan template command.
Command Mode
Global Configuration Mode
Example
Create a Protocol VLAN template named "arp" whose Ethernet protocol type is
0806 and delete the Protocol template whose number is 2:
TP-LINK(config)# protocol-vlan template add arp 0806
TP-LINK(config)# protocol-vlan template remove 2

protocol-vlan vlan

Description
The protocol-vlan vlan command is used to create a Protocol VLAN entry. To
delete a Protocol VLAN entry ,please use no protocol-vlan command.
Syntax
TL-SL3428
Protocol VLAN Commands
JetStream L2 Managed Switch CLI Guide
21