Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Configure the spanning-tree mode as mstp:
T2600G-28TS(config)# spanning-tree mode mstp
spanning-tree mst configuration
34.6
Description
The spanning-tree mst configuration command is used to access MST
Configuration Mode from Global Configuration Mode, as to configure the
VLAN-Instance mapping, region name and revision level. To return to the
default configuration of the corresponding Instance, please use no
spanning-tree mst configuration command.
Syntax
spanning-tree mst configuration
no spanning-tree mst configuration
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Enter into the MST configuration mode:
T2600G-28TS(config)# spanning-tree mst configuration
T2600G-28TS(Config-mst)#
instance
34.7
Description
The instance command is used to configure the VLAN-Instance mapping. To
remove the VLAN-instance mapping or disable the corresponding instance,
please use no instance command. When an instance is disabled, the related
mapping VLANs will be removed.
265