Show Ipv6 Mld Snooping Groups; Show Ipv6 Mld Snooping Querier - TP-Link T2600G-28TS Reference Manual

show ipv6 mld snooping groups

38.28
Description
The show ipv6 mld snooping groups command is used to display multicast
groups.
Syntax
show ipv6 mld snooping groups [ vlan { vlan-id } ] [ ipv6_multicast_addr |
count | dynamic | dynamic count | static | static count ]
Parameter
vlan-id ——The VLAN ID selected to display the information of all multicast
items.
ipv6_multicast_addr —— IPv6 address of the multicast group.
count—— The numbers of all multicast groups.
dynamic—— Display dynamic multicast groups.
dynamic count—— The numbers of all dynamic multicast groups.
static—— Display static multicast groups.
static count—— The numbers of all static multicast groups.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display all of the multicast groups:
T2600G-28TS(config)# show ipv6 mld snooping groups

show ipv6 mld snooping querier

38.29
Description
The show ipv6 mld snooping querier command is used to display the Querier
configuration of VLAN.
Syntax
show ipv6 mld snooping querier [ vlan vlan-id ]
Parameter
vlan-id ——The VLAN ID selected to display, ranging from 1 to 4094.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
338