TP-Link T2600G-28TS Reference Manual page 269

permit ——The operation to forward packets. It is the default value.
source-mac —— The source MAC address contained in the rule.
source-mac-mask —— The source MAC address mask. It is required if you
typed the source MAC address.
destination-mac —— The destination MAC address contained in the rule.
destination-mac-mask —— The destination MAC address mask. It is required if
you typed the destination MAC address.
vlan-id —— The VLAN ID contained in the rule, ranging from 1 to 4094.
ethernet-type —— EtherType contained in the rule, in the format of 4-hex
number.
user-pri —— The user priority contained in the rule, ranging from 0 to 7. By
default, it is not limited.
time-segment —— The time-range for the rule to take effect. By default, it is not
limited.
source-ip —— The source IP address contained in the rule.
source-ip-mask —— The source IP address mask. It is required if you typed the
source IP address.
destination-ip —— The destination IP address contained in the rule.
destination-ip-mask —— The destination IP address mask. It is required if you
typed the destination IP address.
time-segment —— The time-range for the rule to take effect. By default, it is not
limited.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
User Guidelines
Before binding a Combined ACL to a VLAN or interface, you should configure
the SDM template as "default" or "enterpriseV4" and save your configurations.
For more information about SDM configuration, please refer to
Example
Create a Combined ACL whose ID is 2700, and add Rule 10 for it. In the rule,
the source MAC address is 00:01:3F:48:16:23, the source MAC address mask
is 11:11:11:11:11:00, the source IP address is 192.168.0.100, the source IP
249
sdm prefer.