Aaa Authentication Dot1X Default - TP-Link T2600G-28TS Reference Manual

Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
User Guidelines
By default the enable authentication method is "default" with "none" as method1.
Example
Configure a privilege authentication method list "list2" with the priority1 method
as radius and priority2 method as local:
T2600G-28TS(config)# aaa authenticaiton enable list2 radius local

aaa authentication dot1x default

44.11
Description
This aaa authentication dot1x default command is used to configure an
802.1X authentication method list. A method list describes the authentication
methods for users' login in 802.1X. To delete the default authentication method
list, please use the no aaa authentication dot1x default command.
Syntax
aaa authentication dot1x default { method }
no aaa authentication dot1x default
Parameter
method —— Specify the method name. Only RADIUS server group is supported,
and the default method is server group "radius".
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Configure the default 802.1X authentication method as "radius1":
T2600G-28TS(config)# aaa authentication dot1x default radius1
399