Chapter 5 Protocol-Based Vlan Commands; Protocol-Vlan Template - TP-Link T2500G-10TS Cli Reference Manual

Chapter 5
Protocol VLAN (Virtual Local Area Network) is the way to classify VLANs based on Protocols. A
Protocol is relative to a single VLAN ID. The untagged packets and the priority-tagged packets
matching the protocol template will be tagged with this VLAN ID.
5.1

protocol-vlan template

Description
The protocol-vlan template command is used to create Protocol-based
VLAN template. To delete Protocol-based VLAN template, please use no
protocol-vlan template command.
Syntax
protocol-vlan template name
type
no protocol-vlan template
Parameter
protocol-name
which contains 8 characters at most.
ether_2 ether-type
snap ether-type
llc dsap
SSAP type.
template-idx
can get the template corresponding to the number by the
protocol-vlan template
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Protocol-based VLAN Commands
type
| snap ether-type
—— Give a name for the Protocol-based VLAN Template ,
type
—— Specify the Ethernet type.
type
—— Specify the Ethernet type.
dsap type
_ ssap
—— The number of the Protocol-based VLAN Template. You
command.
protocol-name
frame { ether_2 ether-type
dsap_type
| llc dsap
template-idx
ssap type
_ —— Specify the DSAP type and the
40
ssap type
ssap _ }
show