Show Startup-Config; Show System-Time - TP-Link T2600G-28TS Reference Manual

show startup-config

26.26
Description
The show startup-config command is used to display the current configuration
saved in the switch. These configuration settings will not be lost the next time
you reboot the switch.
Syntax
show startup-config
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Display the saved configuration:
T2600G-28TS# show startup-config

show system-time

26.27
Description
The show system-time command is used to display the time information of the
switch.
Syntax
show system-time
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the time information of the switch
T2600G-28TS# show system-time
200