Name - TP-Link T2600G-28TS Reference Manual

Syntax
instance instance-id vlan vlan-id
no instance instance-id [ vlan vlan-id ]
Parameters
instance-id —— Instance ID, ranging from 1 to 8.
vlan-id —— The VLAN ID selected to mapping with the corresponding instance.
Command Mode
MST Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Map the VLANs 1-100 to Instance 1:
T2600G-28TS(config)# spanning-tree mst configuration
T2600G-28TS(config-mst)# instance 1 vlan 1-100
Disable Instance 1, namely remove all the mapping VLANs 1-100:
T2600G-28TS(config)# spanning-tree mst configuration
T2600G-28TS(config-mst)# no instance 1
Remove VLANs 1-50 in mapping VLANs 1-100 for Instance 1:
T2600G-28TS(config)# spanning-tree mst configuration
T2600G-28TS(config-mst)# no instance 1 vlan 1-50

name

34.8
Description
The name command is used to configure the region name of MST instance.
Syntax
name name
Parameters
name —— The region name, used to identify MST region. It ranges from 1 to 32
characters.
Command Mode
MST Configuration Mode
266