Show Ip Dhcp Relay - TP-Link T2600G-28TS Reference Manual

Example
Specify the remote ID as "TP-LINK":
T2600G-28TS(config)# ip dhcp relay information remote-id TP-LINK

show ip dhcp relay

46.8
Description
The show ip dhcp relay command is used to display the global status and
Option 82 configuration of DHCP Relay.
Syntax
show ip dhcp relay
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the configuration of DHCP Relay:
T2600G-28TS(config)# show ip dhcp relay
430