Privilege Requirement
Only Admin level users have access to these commands.
Example
Create a RADIUS server group with the name radius1:
T2600G-28TS(config)# aaa group radius radius1
server
44.7
Description
This server command is used to add the existing server in the defined server
group. To remove the specified server from the server group, please use the no
server command.
Syntax
server ip-address
no server ip-address
Parameter
ip-address —— Specify the server's IP address.
Command Mode
Server Group Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Create the RADIUS server 1.1.1.1 to RADIUS server group "radius1":
T2600G-28TS(config)# aaa group radius radius1
T2600G-28TS(aaa-group)# server 1.1.1.1
show aaa group
44.8
Description
This show aaa group command is used to display the summary information of
the AAA groups. All the servers in this group will be listed if you specify the
group name.
396