Syntax
ip dhcp server ping packets num
Parameter
num —— Specify the PING packets' number, ranging from 0 to 10. By default
it's 1.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Specify the PING packets' number as 2:
T2600G-28TS(config)# ip dhcp server ping packets 2
network
45.8
Description
The network command is used to specify the address and subnet of the
network pool.
Syntax
network network-address subnet-mask
Parameter
network-address —— Specify the network address of the pool, with the format
A.B.C.D. All the IP addresses in the same subnet are allocatable except the
reserved addresses and specific addresses.
subnet-mask —— Specify the subnet mask of the pool, with the format A.B.C.D.
Command Mode
DHCP Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Specify the address pool "product" as 192.168.1.0 255.255.255.0:
T2600G-28TS(config)# ip dhcp server pool product
T2600G-28TS(config-dhcp)# network 192.168.1.0 255.255.255.0
414