Show Sflow Global - TP-Link T2600G-28TS Reference Manual

maxHeader ——Specify the maximum number of bytes that should be copied
from a sampled packet. The value ranges from 18 to 256 and the default value
is 128 bytes.
Command Mode
Interface Configuration Mode (interface gigabitEthernet / interface range
gigabitEthernet)
Privilege Requirement
Only Admin and Operator level users have access to these commands.
Example
Configure Gigabit Ethernet port 1 as the sFlow sampler: specify the Collector-ID
as 1, the ingress rate as 1024:
T2600G-28TS(config)#interface gigabitEthernet 1/0/1
T2600G-28TS(config-if)#sflow sampler collector-ID 1
T2600G-28TS(config-if)#sflow sampler ingRate 1024

show sflow global

41.5
Description
The show sflow global command is used to display the global configuration of
sFlow.
Syntax
show sflow global
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the global configuration of sFlow:
T2600G-28TS#show sflow global
375