Ip Dhcp Snooping - TP-Link T2600G-28TS Reference Manual

Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Bind an ACL entry with the IP 192.168.0.1, MAC 00:00:00:00:00:01, VLAN ID 2
and the Port number 5 manually. And then enable the entry for the ARP
detection:
T2600G-28TS(config)#ip
00:00:00:00:00:01 vlan 2 interface gigabitEthernet 1/0/5 arp-detection
Delete the IP-MAC–VID-PORT entry with the index 5:
T2600G-28TS(config)#no ip source binding index 5

ip dhcp snooping

15.2
Description
The ip dhcp snooping command is used to enable DHCP Snooping function
globally. To disable DHCP Snooping function globally, please use no ip dhcp
snooping command. DHCP Snooping functions to monitor the process of the
Host obtaining the IP address from DHCP server, and record the IP address,
MAC address, VLAN and the connected Port number of the Host for automatic
binding. The switch can also propagate the control information and the network
parameters via the Option 82 field to provide more information for the Host.
Syntax
ip dhcp snooping
no ip dhcp snooping
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
source binding
103
host1 192.168.0.1