T2600G-28TS(config)#show ip source binding
show ip dhcp snooping
15.13
Description
The show ip dhcp snooping command is used to display the running status of
DHCP Snooping.
Syntax
show ip dhcp snooping
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
None.
Example
Display the running status of DHCP Snooping:
T2600G-28TS#show ip dhcp snooping
show ip dhcp snooping interface
15.14
Description
The show ip dhcp snooping interface command is used to display the DHCP
Snooping configuration of a desired Gigabit Ethernet port/port channel or of all
Ethernet ports/port channels.
Syntax
show ip dhcp snooping interface [ gigabitEthernet port | port-channel
port-channel-id ]
Parameters
port —— The Ethernet port number
port-channel-id —— The ID of the port channel.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
.
111