Address Client-Identifier - TP-Link T2600G-28TS Reference Manual

Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Reserve the IP address 192.168.0.10 in the address pool "product" for the
device with the MAC address as 5e:4c:a6:31:24:01 and the hardware type as
ethernet:
T2600G-28TS(config)# ip dhcp server pool product
T2600G-28TS(config-dhcp)#
5e:4c:a6:31:24:01 hardware-type ethernet

address client-identifier

45.11
Description
The address client-identifier command is used to specify the static address
bound with client ID in the address pool. To delete the binding, please use no
address command.
Syntax
address ip-address client-identifier client-id [ascii]
no address ip-address
Parameter
ip-address —— Specify the static binding IP address.
client-id —— Specify the client ID, in the format of hex value.
ascii —— The client ID is entered with ascii characters.
Command Mode
DHCP Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Reserve the IP address 192.168.0.10 in the address pool "product" for the
device with the client ID as abc in ascii:
T2600G-28TS(config)# ip dhcp pool product
T2600G-28TS(dhcp-config)# address 192.168.0.10 client-identifier abc
ascii
address 192.168.0.10
416
hardware-address