ipv6 mld snooping querier vlan
38.15
Description
The ipv6 mld snooping querier vlan command is used to enable the MLD
Querier function. To disable this function, please use no ipv6 mld snooping
querier vlan command.
Syntax
ipv6 mld snooping querier vlan vlan-id
no ipv6 mld snooping querier vlan vlan-id
Parameter
vlan-id —— The VLAN that enables the MLD querier function, ranging from 1 to
4094.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin and Operator level users have access to these commands.
Example
Enable MLD Querier function on VLAN 2:
T2600G-28TS(config)# ipv6 mld snooping querier vlan 2
ipv6 mld snooping querier vlan (general query)
38.16
Description
The ipv6 mld snooping querier vlan command is used to configure the
parameters for MLD Snooping Querier to send a general query frame. To return
to the default configuration, please use no ipv6 mld snooping querier vlan
command.
Syntax
ipv6 mld snooping querier vlan vlan-id { query-interval interval |
max-response-time response-time | general-query source-ip ip-addr }
no
max-response-time | general-query source-ip }
Parameter
vlan-id —— VLAN ID, ranging from 1 to 4094.
interval —— The time interval to send a general query frame by MLD Snooping
Querier, ranging from 10 to 300 (Seconds). By default, it is 60 seconds.
ipv6
mld
snooping
querier
vlan
vlan-id
330
query-interval
{
|