Syntax
netbios-node-type type
no netbios-node-type
Parameter
type —— Specify the node type as b-node, h-node, m-node or p-node.
Command Mode
DHCP Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Specify the address pool's Netbios server type as b-node:
T2600G-28TS(config)# ip dhcp server pool product
T2600G-28TS(config-dhcp)# netbios-node-type b-node
next-server
45.16
Description
The next-server command is used to specify the next DHCP server's address
during the DHCP boot process. To delete the next server, please use no
next-server command.
Syntax
next-server ip-address
next-server
Parameter
ip-address —— Specify the IP address of the next server.
Command Mode
DHCP Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Specify the next server's IP address as 192.168.2.1:
T2600G-28TS(config)# ip dhcp server pool product
T2600G-28TS(config-dhcp)# next-server 192.168.2.1
419