Syntax
interface range port-channel port-channel-list
Parameter
port-channel-list —— The list of the port-channel interface, ranging from 1 to 14,
in the format of 1-3, 5.
Command Mode
Global Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Create the port-channel interfaces 1,3,4 and 5:
T2600G-28TS(config)# interface port-channel 1,3-5
description
42.5
Description
This description command is used to add a description to the Layer 3 interface,
including routed port, port-channel interface, loopback interface and VLAN
interface. To clear the description of the corresponding interface, please use the
no description command.
Syntax
description string
no description
Parameter
string —— Content of an interface description, ranging from 1 to 32 characters.
Command Mode
Interface Configuration Mode
Privilege Requirement
Only Admin, Operator and Power User level users have access to these
commands.
Example
Add a description system-if to the routed port 1/0/9 :
379