Login Local Mode
Firstly, configure the Telnet login mode as "login local" in the prompted DOS screen shown in
Figure 1-3.
Now, you can logon by Telnet in login local mode.
1.
Make sure the switch and the PC are in the same LAN. Click Start and type in cmd in the
Search programs and files window and press the Enter button.
2. Type telnet 192.168.0.1 in the command prompt shown as Figure 1-5, and press the Enter
button.
Figure 1-3 Configure login local mode
Figure 1-4 Run Window
Figure 1-5 Connecting to the Switch
8