Show Sdm Prefer - TP-Link T2600G-28TS Reference Manual

show sdm prefer

43.2
Description
The show sdm prefer command is used to display resource allocation of the
current SDM template in use, or the SDM templates that can be used.
Syntax
show sdm prefer { used | default | enterpriseV4 | enterpriseV6 }
Parameter
used —— Display the resource allocation of the template currently in use, and
the template that will become active after a reboot.
default —— Display the resource allocation of the default template.
enterpriseV4 —— Display the resource allocation of the enterpriseV4 template.
enterpriseV6 —— Display the resource allocation of the enterpriseV6 template.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Display the resource allocation of the template currently in use, and the
template that will become active after a reboot:
T2600G-28TS(config)#show sdm prefer used
390