Ip Mld Snooping Vlan-Config (Router-Port-Forbidden) - TP-Link T2600G-28TS Reference Manual

Example
Enable the MLD Snooping function and modify Router Port Time as 300
seconds, Member Port Time as 200 seconds for VLAN 1-3, and set the router
port as 1/0/1 for VLAN 1-2:
T2600G-28TS(config)# ipv6 mld snooping vlan-config 1-3 rtime 300
T2600G-28TS(config)# ipv6 mld snooping vlan-config 1-3 mtime 200
T2600G-28TS(config)# ipv6 mld snooping vlan-config 1-2 rport interface
gigabitEthernet 1/0/1
Add static multicast IP address ff01::1234:01, which corresponds to VLAN 2,
and configure the forward ports as ports 1/0/1-3:
T2600G-28TS(config)# ipv6 mld snooping vlan-config 2 static ff01::1234:01
interface gigabitEthernet 1/0/1-3
ip mld snooping vlan-config
38.11
(router-port-forbidden)
Description
This command is used to forbid the specified ports as being router ports in the
specified VLAN(s). To delete the forbidden router ports, please use no ipv6 mld
snooping vlan-config vlan-id-list router-ports-forbidd command.
Syntax
ipv6 mld snooping vlan-config vlan-id-list router-port-forbidd interface
{ gigabitEthernet port-list | port-channel port-channel-id }
no ipv6 mld snooping vlan-config vlan-id-list router-port-forbidd interface
[ gigabitEthernet port-list | port-channel port-channel-id ]
Parameter
vlan-id-list —— The ID list of the VLAN desired to modify configuration, ranging
from 1 to 4094, in the format of 1-3, 5.
port-list —— Forbid the specified ports as being router ports. Packets sent from
multicast routers to these ports will be discarded.
port-channel-id —— Forbid the specified port-channels as being router ports.
Packets sent from multicast routers to these port-channels will be discarded.
Command Mode
Global Configuration Mode
326