Privilege Requirement
Only Admin level users have access to these commands.
Example
Configure the login authentication method list on the HTTP access as "list1":
T2600G-28TS(config)# ip http login authentication list1
ip http enable authentication
44.25
Description
The ip http enable authentication command is used to apply the privilege
authentication method list to users accessing through HTTP. To restore to the
default authentication method list, please use the no ip http enable
authentication command.
Syntax
ip http enable authentication { method-list }
no ip http enable authentication
Parameter
method-list —— Specify the enable method list on the HTTP access. It is
"default" by default, which contains the method "none".
Command Mode
Line Configuration Mode
Privilege Requirement
Only Admin level users have access to these commands.
Example
Configure the enable authentication method list on the HTTP access as "list2":
T2600G-28TS(config)# ip http enable authentication list2
show aaa global
44.26
Description
This show aaa global command is used to display global status of AAA function
and the login/enable method lists of different application modules: console,
telnet, ssh and HTTP.
408